LigoWave Preconfigured Plug And Play 802.11ac Wireless Link for Surveilance Applications (DLB-5-15AC-D)

OEM kodas: DLB-5-15AC
Kodas: DLB-5-15AC-D
ID: #1571

Kit includes two preconfigured LigoDLB 5-15ac wireless devices, 5Ghz MIMO 2x2 AP/CPE outdoor units with integrated 2x15dbi antenna, 802.11 a/n/ac, 30dBm power, up to 500Mbps Capacity, Meets IP-66 rating, Max recommended distance: 3km

Kaina be PVM: * Kaina su PVM (21%): * Kainos lygis, kai užsakymo suma:
137.98€ 166.96€ >0€
Geresnės kainos registruotiems vartotojams >100€
>300€
Kiekis:
  Turime sandėlyje
* geresnės kainos tik prisiregistravusiems klientams
 

Produkto savybės:

Preconfigured DLB Wireless PTP Link Kits for Surveillance Scenarios

 
Security

Secure your data and network operations with AES-128 Encryption & Management Frame Protection.

 
Performance

Ensure high throughput, low latency, & stabilized jitter for seamless HD/4K video streams using the iPoll Proprietary Protocol.

 
Simplicity

Enjoy easy & intuitive deployment with Zero-Touch Configuration, smart product design, & innovative mounting.

 

 
Cost-Efficiency

Forget cabling expenses & minimize all maintenance costs with wireless devices made to make your job effortless.

 

Get these preconfigured device kits* for your surveillance networks:

 
 

LigoDLB 5-20n Kit

Max. Recommended Distance:  5km

Throughput Performance:  160+Mbps

 

LigoDLB 15ac Kit

Max. Recommended Distance:  3km

Throughput Performance:  500+Mbps

 

LigoDLB 5-20ac Kit

Max. Recommended Distance:  5km

Throughput Performance:  500+Mbps

 

* Each kit includes 2 preconfigured LigoWave devices, set up for best performance in point-to-point surveillance applications.

 

500+ Mbps mid-range wireless device

500+ Mbps throughput - a result of powerful hardware platform with 802.11ac technology based radio and a proprietary data transmission protocol (iPoll). Incorporating a QCA 9563 CPU (750 MHz), a QCA 9882 radio and 64 MBytes of RAM and 16 MBytes of ash memory the, LigoDLB 5-20 ac series devices are an ideal solution for capacity demanding applications. State of the art RF design with great output power and sensitivity parameters improve range and capacity over the highest modulation - 256 QAM. The 24V Gigabit Ethernet port (passive PoE) allows utilizing the full capacity of the radio when used in a point-to-point or point-to-multipoint network design. LigoDLB ac series devices are backwards compatible with LigoDLB devices using iPoll mode, which helps to expand or upgrade existing networks using the latest technologies over time.

Small form factor
The shape of the enclosure is now smaller, lighter but retains the IP-66 weather protection rating. Smaller packaging reduces freight costs and makes them less obvious. The new design has no metal parts, which makes them lighter and corrosion resistant.

Innovative mounting bracket
The adjustable mounting bracket is very easy to assemble and install. It consists of two easy to connect parts that allow tilting the device up and down when installing on a pole. 3 kV line to ground and 1 kV line-to-line protection allows operating in a harsh weather conditions and unstable electrical installations.

Operating system
New operating system includes all the essential features for point-to-multipoint networks. User interface is built using HTML 5 technology with responsive design. Among the new features there are IPv6 bridge and router support, SSDP and Bonjour device discovery options, flexible traffic shaping and SSTP client.

iPoll 3 – enhanced performance protocol
LigoWave’s iPoll™ PTMP (Point to Multi-Point) proprietary protocol is an innovative solution to eliminate transmission congestion and close cluster interference created in PTMP wireless installations.

Hotspot scenario support
Starting from v7.52 Infinity firmware image can be used on a LigoDLB series devices for the outdoor hotspot and other related applications. After the firmware upgrade DLB devices are converted into access points for outdoor hotspot networks and will lose the functionality of point-to-point or point-to-multipoint connectivity.

Produkto specifikacijos:

Wireless
WLAN standard: IEEE 802.11 a/n/ac, iPoll 3
Radio mode: MIMO 2x2
Radio frequency band 5 GHz models: 5.150 - 5.850 GHz (FCC 5.150 - 5.250 and 5.725 - 5.850 GHz)
Transmit power: Up to 30 dBm (country dependent)
Channel size: 5, 10, 20, 40, 80 MHz
Modulation schemes:
 802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
 802.11 ac: OFDM (256-QAM, 64-QAM, 16-QAM, QPSK, BPSK)
Data rates:
 802.11 ac @ 40 MHz: 400, 360, 300, 270, 240, 180, 120, 90, 60, 30 Mbps
 802.11 ac @ 80 MHz: 866, 780, 650, 585, 520, 390, 260, 195, 130, 65 Mbps
Error correction: FEC, LDPC
Duplexing scheme: Time division duplex
Distance recommendation: PTMP mode (max) - 5 km/ 3.11 mi, PTP mode (max) - 7 km/ 4.35 mi

Antenna
Type: Integrated dual-polarized directional panel antenna
Gain: 15 dBi 

Wired
Interface: 10/100/1000 Base-T, RJ45

Physical
Dimensions: 158 mm (6.2 ‘’), 97 mm (3.8 ‘’), 38 mm (1.5 ‘’)
Weight: 185 g (0.4 lb)
Mounting: Pole mounting bracket included

Power
Power supply: 24 VDC passive PoE (AC to 24 VDC adapter is included in the package)
Power source: 100 – 240 VAC
Power consumption (max): 10 W

Environmental
Operating temperature: -40°C (-40 F) ~ +65°C (+149 F)
Humidity: 0 ~ 90 % (non-condensing)

Management
System monitoring: SNMP, Syslog, Web UI, WNMS
Configuration: WebUI, WNMS

Regulatory
Certification: FCC/IC/CE

Antenna specifications
Frequency range: 5.1 - 5.9 GHz
Gain: 15 dBi
Polarization: Dual linear
Cross-pol Isolation: 21 dBi
VSWR: <1.4
Azimuth beamwidth (H pol): 35 deg
Azimuth beamwidth (V pol): 35 deg
Elevation beamwidth: 35 deg

Papildoma informacija apie produktą:

Datasheet
Link to manufacturer product page