UBIQUITI UniFi WiFi 6 Enterprise Access Point In-Wall (U6-Enterprise-IW)
1x 2.5GbE LAN port (PoE in) | 4x Gigabit LAN Ports (1x PoE out) | 4x4 MU-MIMO on 6GHz | 4x4 MU-MIMO on 5GHz | 2x2 MIMO on 2.4GHz | 10.2 Gbps aggregated over-the-air throughput rate | Up to 115 m² (1,250 ft²) coverage | 600+ client capacity
345.98€ su PVMKaina be PVM: 285.93€ |
Produkto savybės:
Sleek, wall-mounted Wi-Fi 6E access point with an integrated four-port switch designed for high-density office networks. This access point supports Wi-Fi 6 standard and operates in 2.4GHz, 5GHz and 6GHz bands. The aggregate throughput rate is 10.2 Gbps. UniFi 6 In-Wall is equipped with one 2.5G Ethernet PoE-in port and four GbE RJ45 ports with PoE-out on one port (if the device is powered with PoE+ or PoE++). The device is managed with UniFi Network application, which enables centralized management of multiple networks from an intuitive interface, upgrade device firmware remotely, manage network users and guests with ease e.t.c. The UniFi Network application must be version 7.2.85 and later.
Note: Your country or territory must allow 6 GHz spectrum usage for WiFi6E.
- 115 m² (1,250 ft²) coverage
- 600+ connected devices
- WiFi6E (4x4 MIMO)
- Powered using PoE+/PoE++
- (4) GbE ports with (1) PoE output
- 2.5GbE uplink
Produkto specifikacijos:
| Mechanical | |
|---|---|
| Dimensions | 159.7 x 156.7 x 33.8 mm (6.3 x 6.2 x 1.3") |
| Weight | 884 g (1.95 lb) |
| Enclosure materials | Polycarbonate, aluminum |
| Mount material | Aluminum |
| Hardware | |
| Networking interface | (1) Data in: 2.5GbE RJ45 port (4) Data out: GbE RJ45 ports |
| Management interface | Ethernet Bluetooth |
| PoE interface | (1) PoE+ input (1) PoE output |
| Power method | PoE+ PoE++ (required for PoE output) |
| Power supply | UniFi PoE switch |
| Max. power consumption | Excluding PoE output: 21W |
| Max. PoE wattage per port by PSE | 15.4W |
| Supported voltage range | 44—57V DC |
| Max. TX power 2.4 GHz 5-7 GHz |
22 dBm 26 dBm |
| MIMO 2.4 GHz 5 GHz 6 GHz |
2 x 2 (UL MU-MIMO) 4 x 4 (DL/UL MU-MIMO) 4 x 4 (DL/UL MU-MIMO) |
| Throughput rate 2.4 GHz 5 GHz 6 GHz |
573.5 Mbps 4.8 Gbps 4.8 Gbps |
| Antenna gain 2.4 GHz 5 GHz 6 GHz |
4 dBi 5.8 dBi 5.8 dBi |
| LED | White/blue |
| Button | Factory reset |
| Operating temperature | -30 to 60° C (-22 to 140° F) |
| Operating humidity | 5 to 95% noncondensing |
| Certifications | CE, FCC, IC |
| Software | |
| WiFi standards | 802.11a/b/g WiFi 4/WiFi 5/WiFi 6/WiFi 6E |
| Wireless security protocols | WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) |
| BSSID | 8 per radio |
| VLAN | 802.1Q |
| Advanced QoS | Per-user rate limiting |
| Guest traffic isolation | Supported |
| Concurrent client support | 600+ |
| Zero-wait DFS | Yes* *Supported with upcoming firmware versions. |
| Supported Data Rates | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n (WiFi 4) | 6.5 Mbps to 600 Mbps (MCS0 - MCS31 , HT 20/40) |
| 802.11ac (WiFi 5) | 6.5 Mbps to 3.4 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) |
| 802.11ax (WiFi 6/6E) | 7.3 Mbps to 4.8 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160) |
| Application Requirements | |
| UniFi Network | Version 7.2.85 and later |
